Setting The Dip Switches - Epson TM-T88V Manuel D'utilisateur
Masquer les pouces
Voir aussi pour TM-T88V:
- Manuel de l'utilisateur (68 pages) ,
- Guide d'installation (2 pages) ,
- Guide d'installation (2 pages)
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
Setting the DIP Switches
CAUTION:
Be sure to turn off the printer before removing the cover of the DIP switches.
Removing it while the printer is turned on may cause problems such as an
electric short, which leads to a malfunction of the printer.
1.
Turn off the printer.
2.
Turn over the printer.
3.
Remove the DIP switch cover by removing the screw, as shown in illustration
S on page v.
4.
Set the DIP switches using a fine-tipped tool.
5.
Replace the DIP switch cover, and fix it by installing the screw.
The new setting becomes effective after the printer is turned on.
8 TM-T88V User's Manual
Publicité
Table des Matières
