4. Make sure the end of the tape slides into
the ejection slot.
5. Close the tape cover.
To remove a tape cartridge, open the cover,
grasp the sides of the tape, then lift it out of
the printer.
Turning the printer on and off
Make sure the AC adapter is connected or
batteries are installed.
■
Press the
power button to turn on the
P
printer.
The display lights up.
■
When you are finished using the printer,
press the
power button to turn it off.
P
You see a Powering Off message on the
display. Whatever characters you entered
are saved in the printer.
Caution: Do not unplug the printer until the
display turns off.
Getting Started
|
7