Inserting And Removing Tape Cartridges - Epson LabelWorks LW-700 Guide Rapide

Inserting and removing tape
cartridges
Use only tape cartridges with this mark:
You can use LabelWorks tapes with widths
ranging from 1/4 inch (6 mm) to 1 inch (24
mm).
See the list on the back cover, or go to
epson.com/labelworks (U.S.) or
epson.ca/labelworks (Canada).
1. Remove any slack from the tape using a
pencil or pen.
6 | Getting Started
2. Lift up the tape cover.
.
3. Insert the cartridge and press it down
firmly until it snaps into place.