Inserting And Removing Tape Cartridges - Epson LABELWORKS LW-600P Guide Rapide

1. Open the battery cover.
2. Insert 6 AA alkaline batteries, positioning
the + and - ends as shown.
3. Replace the battery cover.
Inserting and removing tape
cartridges
You can use any LabelWorks LC tape, with
widths ranging from ~1/4 inch (6 mm) to
~1 inch (24 mm).
Use only label cartridges with this mark:
See the list on the back cover, or go to
epson.com/labelworks or epson.ca/
labelworks.
.
Getting Started | 5