Epson LABELWORKS LW-600P Guide Rapide page 11

If Bluetooth is disabled, enable it by
following the steps below:
1. Press the button to turn off the
printer.
2. Press the button and the Bluetooth
button at the same time.
3. Pair your device to the printer. Follow the
instructions for your device's operating
system below.
Android™
1. Turn on the mobile device.
2. Go to Settings > Wireless & Network
and turn on Bluetooth.
3. Select Search for devices.
Wait while your device scans for the
printer.
The printer is displayed when scanning
has finished.
4. Select the printer.
Pairing is complete when the printer is
listed under Paired Devices.
Note: The Bluetooth icon in the status bar
does not change after pairing is complete,
nor does the connection status display on
the Bluetooth settings screen.
5. Open iLabel.
6. Select .
7. Select Printer.
Installing Software | 9