Status Lights; Other Problems - Epson LABELWORKS LW-600P Guide Rapide

Status lights

Error
Light Condition
Pulsing
On
Flashing quickly
Flashing (once
every 5 seconds)
On
Flashing quickly
Flashing quickly
22 | Solving Problems
Battery Bluetooth
Printer status
Bluetooth enabled
Bluetooth connection
established
Performing operation
such as printing or label
cutting
Bluetooth disabled
Low batteries; replace
batteries soon.
Replace batteries
Printer error. Check the
message displayed on
the connected device.

Other problems

Printer does not turn on
■
Check that the power cable is connected
properly, or that batteries have been
properly inserted. If the printer still does
not turn on, contact Epson.
■
Check your computer monitor or mobile
device for any messages.
Unable to establish a Bluetooth
connection (pairing)
■
Check if the printer's
not, enable Bluetooth on the printer and
try pairing with the printer again. See
"Connecting to a mobile device using
Bluetooth" on page 8.
■
Check if the printer is communicating
with another mobile device. The printer
can only communicate with one device
at a time.
light is pulsing. If