Ornaments With Ribbon Hangers - Epson LabelWorks LW-700 Guide Rapide

If you need a longer ribbon, add spaces
or repeat the text and symbols.
Tip: If you turn off the Auto Cut setting, you
can use the Print copies feature to create a
repeated design (by pressing
information, see the online User's Guide.
2. Print your ribbon.
3. Tie the ribbon around an elastic ponytail
holder. Or, tie a bow and glue it to a
plastic hair clip.
Make sure you twist the ribbon when
tying it so you can see the printed design
on both ends.

Ornaments with ribbon hangers

Printed ribbon makes a perfect Christmas
ornament hanger.
1. To add length to one end of the ribbon
)
. For more
2. Create your ribbon design with vertical
3. Make sure you add enough spaces at the
4. Print your ribbon.
5. Thread the ribbon through the ornament
6. Hang your ornament on the tree.
(unprinted), press
Tape feed. Repeat this process to add
more length to the end of the ribbon.
text and symbols.
Tip: Press and select Vertical.
end of the ribbon so that you can loop it
through the ornament hook.
hook and tie the ends together as shown.
+ , then select
Printed Ribbons | 25