Lanaform 3L110105 Mode D'emploi page 5

wear and tear or damage, or if this device has
not been used correctly, it must be returned
to the manufacturer or reseller before it is
used again.
If the power cable is damaged, it must be
replaced by the manufacturer; contact its
after-sales department to have it repaired
or replaced.
Always take note of the notes on its use, clean-
ing and maintenance.
Do not place any item on the device.
If you have any questions about using our
device, please contact customer service.
Before using the device, remember to remove
the silica gel desiccant.
USE
The 2-in-1 Shiatsu Comfort massaging and
heating pad is designed solely for massaging
and/or reheating the feet, legs, back, arms
or neck of the human body. The device is
designed for domestic use only.
Important information
The following symbols are used in these
instructions for use, on the packaging and
on the data plate of the device and its ac-
cessories:
Read the instructions
Do not insert needles
Only use the device in a dry environment
Weather proof
Warning instruction showing a
risk of injury or health risks
Safety note showing a risk of
damaging the unit/accessory
Do not wash
Do not use bleach
Do not tumble dry
Do not iron
Do not clean
This product must not be used by very young
children (between 0 and 3 years old)
INTRODUCTION
Thank you for buying the 2-in-1 Shiatsu
Comfort massaging and heating pad by LA-
NAFORM. The 2-in-1 Shiatsu Comfort mas-
saging and heating pad provides you with
a circular kneading massage for releasing
tense muscles. This pad's massage nodes
move inwards or outwards for a deeper and
more authentic massage experience. The
versatile design of the massaging and shiatsu
pad allows you to target your neck, back, legs,
shoulders and feet.
The Shiatsu massage is based on ideas em-
bedded in traditional Chinese medicine, spe-
cifically the meridian system, i.e. the channels
of the human body in which energy circulates.
The aim of a Shiatsu massage is to promote an
individual's physical, emotional and mental
wellness by working on energy blockages in
the meridians and by stimulating the body's
self-regulating capacity with pressure move-
ments exerted along the meridians using
fluent movements.
In addition to the Shiatsu massage with
two intensities and two rotation speeds,
the 2in1 Shiatsu Comfort shiatsu pad has a
heating function with two intensities. The
two functions can be used at the same time
or separately.
DESCRIPTION OF THE
DEVICE [ insert_p 1]
1 Detachable foot warmer
2 Detachable shiatsu pad
3 Zip fastening
4 Remote control
5 Power cable
6 Adapter
REMOTE CONTROL [ insert_p 2]
1 On /Off
2 Shiatsu massage/massage intensity
3 Shiatsu massage rotation direction
4 Heating function/heating intensity
AREA OF USE
• Open the cardboard packaging.
• Remove the device upwards, leaving the
protective film behind.
• Now remove all the protective film.
• Check that the device, remote control,
power cable and mains adapter are not
damaged.
INSTRUCTIONS FOR USING
THE 2-IN-1 SHIATSU COMFORT
MASSAGING AND HEATING
PAD FOR THE FEET
• Installing the 2-in-1 Shiatsu Comfort
massaging and heating pad on a hard,
flat surface.
• Make sure that the shiatsu pad and foot
warmer are properly connected using
the zip fastening.
• Connect the power cable to the mains
adapter and connect this to a power
socket, checking that the voltage of the
adaptor corresponds to the voltage of
your home network.
• Put your feet inside the massaging foot
warmer.
• Press the On/Off button to switch the de-
vice on. A red LED light is displayed above
the corresponding button.
Shiatsu Massage Function
• To activate the Shiatsu massage function,
press the "Shiatsu Massage" button. The
massage heads will start to turn in an an-
EN
FR NL DE ES PL CS SK SL BG
ti-clockwise direction and a green LED
light will be displayed.
• The 2-in-1 Shiatsu Comfort massaging
and heating pad has 2 Shiatsu massage
intensities. To select one of them, keep
pressing the "Shiatsu massage" button.
A light green LED light corresponds to
the lowest speed whereas the dark green
light corresponds to the highest intensity.
• To change the direction of the Shiatsu
massage heads, press the "Shiatsu Mas-
sage rotation direction" button.
• The Shiatsu massage function stops auto-
matically after 15 minutes. If you want to
use the massaging and heating pad again,
press the "On/Off" button again.
• If you press the massage heads too hard, a
system protecting the device will interrupt
the massage. To reactivate it, unplug the
device, then plug it back in.
Heat Function
• To activate the heating function, press
the "Heating Function" button. A red LED
light is displayed above the correspond-
ing button.
• The 2-in-1 Shiatsu Comfort massaging and
heating pad also has two heating inten-
sities. Keep pressing the corresponding
button to select the low intensity (light
red LED light) or the high heating intensity
(dark red LED light). To stop the heating
function, press the "Heating function" but-
ton once again. The LED light disappears.
• To reactivate it, press the "Heating Func-
tion" button once again.
• The heating function is programmed to
stop automatically after one hour. If you
want to use the heating function again,
press the "Heating Function" button
once again.
info_out Notes:
• If you want to use the function for a
lengthy period, we recommend that
you select the lowest heat setting on
the control mechanism to prevent your
feet overheating as this may cause burns;
• Unplug the power cable from the wall
socket after each use;
• When first using the device, it may emit a
plastic odour. This odour will not persist.
INSTRUCTIONS FOR USING
THE 2-IN-1 SHIATSU COMFORT
MASSAGING AND HEATING
PAD FOR YOUR BODY
• Remove the shiatsu pad from the
foot-warmer using the zip fastening.
• Place the shiatsu pad on the area of the
body you wish to massage using the in-
structions in this handbook.
• Refer to the instructions for use in the
previous paragraph when using the shi-
atsu pad.
5
/ 32 English