Possible Charging Programmes - EUFAB 16615 Mode D'emploi

Masquer les pouces Voir aussi pour 16615:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
Caution: After plugging the mains cable inselect the desired charging pro- gramme by operating the
MODE button multiple times. If the MODE button is not pressed, the charging process is not started. When
charging has started it is no longer possible to switch to another charging program, If you wish to work with a
program other than the set charging program, pull the plug out of the socket and wait until the display has gone
dark. Then insert the plug again and proceed as described above.
Now, connect the power plug of the charger to the mains socket. The background illumination of the display is
activated.
If the battery has been connected incorrectly (wrong poles) or the charger has no contact, the following error mes-
sage appears on the display „
ted, this cannot be charged using the battery charger. If the battery has been correctly connected, the display shows
the current battery voltage and the symbol for the set charging programme. By pressing (multiple times) the MODE
button, you can select the appropriate charging programme for your needs.
The charging programmes appear in the following order and may be selected by pressing the MODE button:
Motorbike 6 V
Motorbike 6 V winter
Car 12 V
Car 12 V winter
Depending on the charging state of the battery, the device adapts the charging current in order to best charge the
connected battery. The specified maximum charging current is only used during the main charging phase. Shortly
before the full charging capacity is achieved, the device switches to a lower charging current. This ensures that the
battery is gently and optimally charged to full capacity.
The battery symbol (7) (Figure 2: Display) shown on the display indicates the current filling level of the battery.

Possible charging programmes

6 Volt mode
Charging programme for 6 V batteries, 1.2 Ah to 14 Ah, temperatures above 0°C
Charge current:
charge voltage:
6 Volt winter mode
Charging programme for 6 V batteries, 1.2 Ah to 14 Ah, temperature below 0°C
Charge current:
charge voltage:
Motorbike mode
Charging programme for 12 V batteries from 1.2 Ah to 14 Ah, temperatures
above 0°C
Charge current:
charge voltage:
Motorbike winter mode
Charging programme for 12 V batteries from 1.2 Ah to 14 Ah, temperatures
below 0°C
Charge current: 2 A maximum
charge voltage: 14.8 V
Car mode
Charging programme for 12 V batteries from 14 Ah to 120 Ah, temperatures
above 0°C
Charge current: 4 A maximum
charge voltage: 14.6 V
Car winter mode
Charging programme for 12V batteries from 14 Ah to 120 Ah, temperatures
below 0°C
Charge current: 4 A maximum
charge voltage: 14.8 V
Battery maintenance charge mode
As soon as the battery is fully charged, the charger switches automatically over
to battery maintenance charge mode. This is indicated appropriately on the
display.
8
Error message
„. If the error message „
2 A maximum
7.2 V
2 A maximum
7.4 V
2 A maximum
14.6 V
„ is shown, a defective 6 V battery has been connec-
Motorbike 12 V
Motorbike 12 V winter

Publicité

Table des Matières
loading

Table des Matières