Fm Radio Mode; Selecting Stations; Now Playing Information - Albrecht Audio DR 316 C Mode D'emploi

14 FM radio mode

FM radio mode receives analogue radio from the
FM band and displays RDS (Radio Data System)
information about the station and show (where
broadcast).
To enter FM mode, either press MODE until the
display shows FM Radio or select [Menu] > Main
menu > FM.

Selecting stations

14.1
To find a station, press TUNE knob . The frequency display starts to run up as DR 316 C
scans the FM band. Alternatively, you can scan up or down by pressing and holding the
or buttons or tune manually with quick presses, or by turning the TUNE control.
Note: Scanning can be set to search for strong signals only, (see 12.3 Settings below)
Preset stations can be stored and recalled as described in Presets.

Now playing information

14.2
While an FM station is playing, the screen shows one of the two following sets data:
• If RDS information is available, by default the
service name (i.e. station name) is displayed.
You can cycle through further RDS information
by pressing INFO. Each time you press INFO,
another set of information is displayed, cycling
through RDS radio text, RDS programme type,
frequency and today's date.
• If no RDS information is available, the currently
tuned frequency is shown.
72
English