JVC UX-H33 Manuel D'instructions page 13

2.1.9 Remove the LCD system CPU board
(See Fig.18)
(1) Disconnect the wire from the connector CN716 on the LCD
system CPU board.
(2) Release the two joints f and pull out the LCD system CPU
board.
2.1.10 Removing the operating switch board
(See Fig.19,20)
• Prior to performing the following procedure, remove the front
panel assembly, the cassette mechanism assembly and the
LCD system CPU board.
(1) Remove the two screws M attaching the operating switch
button.
(2) Remove the two screws N attaching the operating switch
board, and remove.
M
Operating switch button
Fig.19
f
LCD system CPU board
Fig.18
N
Operating switch board
Fig.20
UX-H33
CN716
(No.22044)1-13