Publicité
Å
ı
1
a
FRONT FORK
Installation
1. Install:
Front fork
G
NOTE:
Temporarily tighten the pinch bolt (lower
G
bracket).
Do not tighten the pinch bolt (upper bracket)
G
yet.
2. Tighten:
Cap bolt 1
G
3. Adjust:
Front fork top end a
G
Front fork top end (standard) a:
Zero mm (Zero in)
Å TT-R125E
ı TT-R125LWE
4. Tighten:
Pinch bolt (lower bracket) 1
G
Pinch bolt (upper bracket) 2
G
Screw (dust boot) 3
G
NOTE:
Make sure that the dust boot holes a are
G
positioned outward.
Tighten the screw (dust boot) until the top of
G
the dust boot is touching the lower bracket.
5. Install:
TT-R125E
Cap 1
G
5 - 40
CHAS
23 Nm (2.3 m · kg, 17 ft · lb)
60 Nm (6.0 m · kg, 43 ft · lb)
25 Nm (2.5 m · kg, 18 ft · lb)
Publicité
Chapitres
