Information For The User - Bartscher 1535T2GLK Mode D'emploi

Saladette
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 49
Defrosting manually
In addition to automatic defrosting, manually defrosting can be activated at any time,
to do this, hold down the
Manual defrosting commences. The digital display shows „
NOTE!
Condensation water evaporates automatically.

5.2.4 Information for the user

Fill / complete the saladette only after the display has shown the required
temperature.
Prepare the food products beforehand and place them in appropriate GN containers
(see. section 4.1 „Technical data").
Next, place the GN container with food products on the grid in the fan doors or in
the GN container area under the glass top.
When placing products in the saladette, the supplied adaptor bars may be used as
shelves for GN containers.
Tip: Remember that the glass top area is not designed for cooling food products,
but only as a storage area.
Do not place any warm food products or liquids in the saladette. Allow them to cool
down to room temperature first.
When the saladette is in use, remember to leave enough space between the inner
walls of the device and the food placed inside to ensure air circulation inside the
device.
The more food products in the saladette and the longer the doors/drawers stay open,
the higher energy consumptions.
To minimize the losses during the cooling process, do not leave doors open longer
than necessary. Furthermore, do not open them too often.
To avoid build-up of any unpleasant odours inside the saladette, observe the
recommended shelf life of the stored food products and regularly clear the device.
In the case of power outage, leave the doors, drawers and covers closed to prevent
the loss of cooled air.
- 40 -
for more than 2 seconds.
".

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

200279

Table des Matières