Turning The Unit On / Off; Tips For The User - Bartscher 110.134 Mode D'emploi

Turning the unit on / off

•
Press and hold
functions will be deactivated, and the display will alternate between showing „OFF"
and the sensor temperature value.
Defrost
Automatic defrost
Every 24 hours the unit automatically defrosts 6 times. The internal clock comes on
when the unit is first activated.
If you want the automatic defrost function to come on at a different time, press and
hold for at least 3 seconds. The display will show the symbol
immediately start a defrost cycle, and the next one will begin in 4 hours.
Manual defrost
Manual defrost can also be activated at any time: press and hold
3 seconds.
Manual defrost will be activated. The display will show the symbol
NOTE!
If you wish to change other settings or parameters, instructions on how to do so
can be found in the information included concerning temperature control, or such
changes can be performed by qualified service personnel.

Tips for the user

•
Fill the cooling top only after the display shows the desired temperature has been
reached.
•
Fill the appropriate GN containers with food products prepared for serving, then
place them inside the cooling top.
•
Do not place warm food products inside the cooling top, but leave them to cool
down first.
•
Do not overfill the cooling top, as this may have a negative impact on the
circulation of air inside the unit.
•
After a power failure or after removing the unit's plug, do not reconnect it to a power
source for at least 5 minutes.
- 32 -
for at least 3 seconds. The temperature regulation and defrost
. The unit will
for at least
.