Operation And Settings - Bartscher 1535T2GLK Mode D'emploi

5.2.3 Operation and settings

Indication of required value
•
shortly press button
•
press button
Change of required value (required temperature)
•
press and hold button
•
the required value will be displayed and the diode
•
use button
required value;
•
confirm new value with button
of set value.
NOTE!
If you need other settings or parameters, please download the attached
description of the temperature adjustment or leave this task to customer
service employees.
Turning the device off
When the device is not used anymore, turn it off with ON/OFF switch and disconnect
from the power supply (pull the plug!).
Defrosting
Automatic defrosting
The device is automatically defrosted four times within 24 hours. The clock starts
upon first activation. If the automatic defrosting is to be carried out at other times,
press for more than 2 seconds. The digital display shows „
Defrosting will start right away, the next defrosting will take place after 6 hours.
to show the required temperature;
again or wait 5 seconds to return to the previous indication.
for at least 3 seconds;
or to decrease or increase the value until the display shows the
or
or wait 10 seconds for the automatic storing
will flash on the display;
".
- 39 -