Tips For The User; Before The First Use; Digital Temperature Controller - Bartscher 1535T2GLK Mode D'emploi

5.2 Tips for the user

CAUTION!
Carefully read this instruction manual, because it provides information
regarding safety and operation of the device.
Store the instruction manual for future reference.
Incorrect installation, operation, maintenance and cleaning, as well as any
changes and modifications may lead to the incorrect operation, damages or
injuries.

5.2.1 Before the first use

•
Before the first use thoroughly clean the device and accessories. Follow the
instructions in section 6 „Cleaning and maintenance".
•
Plug the device to the grounded socket.
•
Turn the device by turning the ON/OFF power switch right next to the temperature
controller on the control side of the device.
•
The green power indicator in the switch will come on. The digital display will show
st
the 1 temperature inside the device.
•
Before first use and placing any food products in the saladette, the device should
reach the required temperature.
•
If necessary, switch on the lighting of the glass top using the light ON/OFF switch
on the left side next to the temperature controller.

5.2.2 Digital temperature controller

Basic settings of the temperature are pre-set and reflect the operating temperature in
the range of 0 ° C – 10 ° C inside of the device. Dur ing normal operation of the device
the digital display indicates the current temperature inside of the device.
Button Functions
Display a required value, select parameters
in programming mode or save the procedure
Manual start of defrost
In programming mode, select a parameter
code, increase the displayed value
In programming mode, select a parameter
code, decrease the displayed value
AUX
- 37 -