Friedrich J Serie Manuel D'installation page 16

16
! CAUTION
- Assemble it with conduit.
! CAUTION
The power cord connected to the outdoor
unit should be complied with the following
specifications (UL recognized or CSA cer-
tified).
AWG_"A"
Power supply cable
Power
"A"
The power connecting cable connected to the
indoor and outdoor unit should be complied
with the following specifications (UL recog-
nized or CSA certified).
Capacity(Btu/h)
24k,30k,36k
12
AWG_"B"
Connecting cable
Connecting
Cable
"B"
Indoor unit
1
Insert the connecting cable through the
bottom side of indoor unit and connect the
cable (You can see detail contents in 'Con-
necting the cables' section)
2
Secure the cable onto the control board
with the cable retainer.
3
Tape the tubing pipe, drain hose and the
connection cable. Be sure that the drain
hose is located at the lowest side of the
bundle. Locating at the upper side can
cause overflow from the drain pan through
the inside of the unit.
Control Cover
1(L1) 2(L2)
1(L) 2(N)
Capacity(Btu/h)
24k,30k,36k
18
3
3
Power connecting cable