Friedrich J Serie Manuel D'installation page 13

Piping
Control Cover
1(L1) 2(L2)
1(L) 2(N)
ubing Holder
T
3
3
Power connecting cable
3
Tape the tubing pipe, drain hose and the
connection cable. Be sure that the drain
hose is located at the lowest side of the
bundle. Locating at the upper side can
cause overflow from the drain pan through
the inside of the unit.
<Left side piping>
!
NOTE
Insert the drain hose at left side when you
use left side piping type.
<Right side piping>
Connecting
cable
Drain hose
* The feature can be changed according to
the type of model.
! CAUTION
If the extension drain hose is routed inside
the room, insulate the hose with an insula-
tion material* so that dripping from sweat-
ing (condensation) could not damage fur-
niture or floors.
• Foamed polyethylene or equivalent is
recommended.
13
Tape
Connecting pipe