KTM 55712945044 Instructions De Montage page 34

5 ASSEMBLY
14
–
Mount the molded ring.
–
Position the water pump cover.
–
Mount and tighten screws
Guideline
Screw, water pump
cover
–
Mount and tighten screw
Guideline
500926-01
Screw, water pump
cover
–
Mount screws
Guideline
Screw, intermediate
clutch cover
–
Mount screw
Guideline
Screw, intermediate
clutch cover
–
Mount screws
tern.
Guideline
Screw, outer clutch
cover
–
Mount adjusting spring
insert.
A
Recess
500927-01
–
Position the cap.
–
Mount and tighten screws
Guideline
Screw, exhaust con-
trol cap
500928-01
cl
.
M6
cm
with the seal ring.
M6
cp
, but do not tighten yet.
M6x25
cq
, but do not tighten yet.
M6x30
cr
and tighten all screws in a crisscross pat-
M6x60
co
with the auxiliary spring and spring
in the spring insert engages in angle lever
cn
.
M5
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
8 Nm (5.9 lbf ft)
B
.
5 Nm (3.7 lbf ft)