Cover Travel Cot; Care And Maintenance - Joie allura 120cm Manuel D'utilisateur

Cover Travel Cot

see images -
13
12
Cover the travel cot by following these steps.
1. Place the mattress, with handle facing the zipper on the carry bag.
2. Cover unit with carry bag , and then zip together.
12
3. Pull the handle out from carry bag. The carry bag and the travel cot will be lifted together.
Accessories (May not be included)
Bassinet Assembly
-
see images
14 17
Tip
Before setting up bassinet, make sure all rails have become rigid.
The bassinet must be fully assembled and installed before using, including 12 bassinet clips
and mattress.
1. Position the bassinet clips over and down into the edges of the travel cot.
!
Be sure all bassinet clips are secured in place by pushing down firmly on each bassinet clip
until all are snapped into place.
2. Assemble the connecting tubes. Stick the hook and loop fasteners.
3. Place the mattress into the bassinet.
16
!
Place mattress, soft side up.
The installed bassinet is shown as
17
9
13
14
15

Care and Maintenance

1. The covering material is not removable.
2. Your travel cot can be spot cleaned with a sponge and soapy water.
3. Do not use undiluted neutral detergent, gasoline or other organic solvent to wash the travel cot.
It may cause damage to the travel cot.
4. To wash carry bag, machine wash in lukewarm water and drip-dry. Do not use bleach.
5. At the beach or in the garden, clean sand and grit off your travel cot. Sand in the long rail locks
may cause damage.
6. From time to time, check your travel cot for worn parts, torn material or stitching. Replace or repair
the parts as needed.
7. If the travel cot is not in use for a long period of time, please put it in the shade where your child
cannot access it.
10