Side Brush - Roborock S7 Manuel D'utilisation

Routine Maintenance
3. Remove the main brush cap, rotating in the unlock direction.
After cleaning, reattach it turning in the lock direction.
4. After removing the tangled hair or dirt at both ends of the main
brush, reinstall it, press on the main brush cover to lock it in
place.
Note:
• Use a wet cloth to wipe the main brush. Dry thoroughly before use while avoiding direct
exposure to the sun.
• Do not use corrosive detergent or disinfectant to clean the main brush.

Side Brush

1. Unscrew the side brush and remove any entangled dirt.
2. Reinstall and tighten in place.
029