Instructions For The User; Cleaning And Maintenance; Cleaning The Stainless Steel Surfaces; Cleaning The Enamelled Surfaces - steel ZS0389 Manuel D'installation

4. Cleaning and maintenance

Use only suitable detergents to clean the surfaces. The manufacturer declines all
responsibility and is not liable for damage arising from the use of unsuitable and/or other
detergents than those indicated.
4.1
To clean and preserve the stainless steel surfaces, use a solution of warm water and vinegar or
neutral soap. Pour the solution onto a damp cloth and wipe the steel surface, in the direction of
the satin finish, rinse thoroughly and dry with a soft cloth or chamois leather.
Do not under any circumstances use metallic sponges or sharp scrapers that may damage
the surfaces. Only use non-scratch, non-abrasive sponges and, if necessary, wooden or plastic
utensils.
4.2
Clean with a non-scratch, non-abrasive sponge dampened with neutral soap and water. Grease
stains can easily be eliminated with hot water or a product specifically made for cleaning enamel.
Rinse carefully and dry with a soft cloth or a piece of deerskin.
Do not use products containing abrasives, scouring pads, steel wool or acid, which may
spoil the surfaces. Do not leave acid or alkaline substances on the enamel (lemon juice, vinegar,
salt, etc.).
4.3
Clean with a non-abrasive, scratchproof sponge dampened with warm water and neutral soap or
with a standard detergent for polished surfaces. Rinse and dry carefully with a soft cloth.
Abrasive pastes, coarse wire pads, steel wool or acid will damage the surfaces. Do not use
alcohol.
4.4
We recommend using cleaning products normally available on the market. These products ensure
the wood is preserved over time. If these products are not available, we recommend removing the
dirt as soon as possible using a cloth dampened with water and neutral soap. Rinse thoroughly
and dry with a soft cloth. Remove the larger incrustations and more stubborn residues using a
scratch-resistant scraper for wood or a special sponge designed for delicate surfaces.
Do not under any circumstances use metallic sponges or sharp scrapers that may damage
the surfaces.
Do not wash wooden accessories and parts in the dishwasher. Keep dry and avoid extreme
temperature changes. Excessive humidity and extreme temperature changes may
irrevocably deform the wooden accessories and parts.
32

Instructions for the user

Cleaning the stainless steel surfaces

Cleaning the enamelled surfaces

Cleaning the polished surfaces

Cleaning the wooden surfaces, accessories and parts