Headphone Output - Rega brio Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

Warnings

Recommended ambient operating temperature 5 to 35°C

Allow adequate air circulation around the whole of the Brio especially its sides as this is where most of the

heat is dispersed, this is crucial when the amplifier is running at high listening levels and for extended

periods of time. This unit is intended for use in moderate climates.

To reduce the risk of fire, electric shock or product damage, do not expose the unit to rain, moisture,

dripping or splashing and ensure that no objects filled with liquids, such as vases, shall be placed upon it. Do

not remove the case covers. There are no user serviceable parts inside.

No naked flame sources, such as lit candles, should be placed on the apparatus.

Specifications

Input sensitivities for rated output level:

Input 1 (phono) input sensitivity = 2.1mV at 47KΩ in parallel with 220pF.

Maximum Input 1 (phono) input level = 100mV

Input 2-5 (line) input sensitivity = 210mV at 47kΩ

Maximum input 2-5 (line) input level = 10.25V

Power outputs at 230/115V supply voltage:

50Watts RMS both channels driven into the rated load of 8Ω

58Watts RMS one channel driven into the rated load of 8Ω

73Watts RMS both channels driven into the rated load of 4Ω

93Watts RMS one channel driven into the rated load of 4Ω

Continued high level use into 4Ω may cause the case to exceed 40° C above the ambient temperature.