Klarstein WINDWAKER ECO Manuel D'instructions page 89

Step 6: Install Drain Hose
Drain hose
Outlet pipe
Tape
1 Connect the drain hose to the drain line of the indoor air conditioner.
2 Wrap adhesive tape around the connecting piece.
Note: Wrap insulating material around the drain hose to prevent condensation. The
plastic plugs are not included.
Step 7: Cable Connection of the Indoor Air Conditioner
1 Open the panel, remove the screw on the wiring cover and then take down the
cover.
Screw
Panel
Wiring cover
Drain hose
Outlet
pipe
Drain hose
Insulation material
EN
89