Klarstein WINDWAKER ECO Manuel D'instructions page 77

TEMP - Set Temperature
If you press the TEMP button, you can see the set desired temperature and the actual
indoor or outdoor temperature on the air conditioner screen. The remote control setting
can be selected in the following order:
no
display
If you select this setting, the temperature display of the indoor air conditioner
shows the set temperature.
If you select this setting, the indoor air conditioner temperature display will
show the actual room temperature.
If you select this setting, the indoor air conditioner temperature display will
show the outdoor temperature.
• The outdoor temperature indicator is not available on some models. In this case, if
the indoor air conditioner receives the signal to display the outdoor temperature,
the indoor temperature is still displayed.
• The indoor air conditioner is factory set to display the set temperature when turned
on. There is no separate display option on the remote control for this.
• If you display the indoor or outdoor temperature on the screen of the indoor air
conditioner, the unit automatically returns to the set temperature display after 3-5
seconds.
EN
77