Accessories; Lubrication - Kongskilde KA10 Instructions De Montage Et D'utilisation

Counter
The counter records the number of
batches passing through the weigh-
er. The weighed quantity equals the
number of weighed batches ∞ the
weight of the batches. See the
paragraph „Setting up of required
batch weight".
Set counter to zero: Put the key in
the counter and turn it until all of
the figures are at 0.
The weigher can also be provided
with a pulse switch for electronic
counter or other electrical control

(accessories).

Lubrication

All moving parts, except the knife
bearings, are to be oiled with a thin
8
oil. Remove superfluous oil, as it
will cause dust to accumulate.
To prevent rusting, oil the weigher
carefully whenever it is not required
for a long period.
The weigher should be cleaned
regularly. Damp air and gummy
materials may cause dust to build
up on the weigher parts. Check
especially the knife bearings.
Accessories
1. Inlet hopper (495x480x340)
Order No. 132 030 082
Inlet hopper (400x365x200)
Order No. 132 030 081
2. Adjustable legs
Order No. 132 030 000
3. Outlet hopper. For connection of
OK160 pipes.
Order No. 132 030 001
4. Inlet piece (w/o quick release
clamp). For connection of
OK160 pipes.
Order No. 132 030 007
5. Intermediate piece with baffles.
Order No. 132 030 077
6. Dust shield.
Order No. 132 030 083
KA10
A 500
B 500
C 585
D 400
E 0-300
F
G 550
H 250
K 100
L 125
M OK160
N 400
O 200
P 480
R 335
7. Pulse switch. For electronic
counter or other electrical con-
trol.
Order No. 132 010 010
8. Electric counter. For 3 volt
battery.
Order No. 132 023 172
9. Electric counter with pre-set. For
220 volt. A combined totalizing
and batch counter, which auto-
matically disconnects the feed-
ing conveyor, when the pre-set
number of portions has been
reached.
Order No. 132 023 175
40