Plumbing Information - GE GUD24ESSJWW Instructions D'installation

PLUMBING INFORMATION

7
WATER SUPPLY REQUIREMENTS
the appliance water inlet hose connections. The faucets
connected.
per square inch with a maximum unbalance pressure,
selected.
DRAIN REQUIREMENTS
minute.
siphoning action.
the hose, coupling and clamps provided in the machine
must be used and, in addition, a siphon break MUST be
installed on the back of the machine. Obtain and use a
siphon break kit and follow the instructions in the kit.
Installation Instructions
CONNECTING TO PLUMBING FACILITIES
8
If not installed, install rubber washer in one end of hot water hose.
Thread hot water hose onto connection labeled H at top rear
If not installed, install rubber washer in one end of cold water
hose. Thread cold water hose onto connection labeled C at top
pliers.
for you to make water, drain, electrical and vent connections to
your home.
NOTE: If longer drain hose
is required, order drain hose
extension kit , part number
original hose with hose clamp
Insert free end of drain hose into
drain opening of your home up
remove hose stopper it prevents
drain are built into wall, fasten
drain hose to one of water
hoses with cable tie provided
drain is a standpipe, fasten drain
hose to standpipe with cable tie
provided.