GE GUD24ESSJWW Instructions D'installation page 8

CONNECTING THE DRYER TO HOUSE VENT
RIGID METAL TRANSITION DUCT
• For best drying performance, a rigid metal transition duct is
recommended.
• Rigid metal transitions ducts reduce the risk of crushing and
kinking.
UL-LISTED FLEXIBLE METAL (SEMI-RIGID) TRANSITION DUCT
enclosed spaces.
• For many applications, installing elbows at both the dryer and
the appliance to sit close to the wall without kinking and or
• Avoid resting the duct on sharp objects.
UL-LISTED FLEXIBLE METAL (FOIL-TYPE) TRANSITION DUCT
• In special installations, it may be necessary to connect the
maintained throughout the entire length of the transition duct.
ducts that comply with the "Outline for Clothes Dryer Transition
enclosed spaces.
• Avoid resting the duct on sharp objects.
2. Secure the duct with a clamp.
its full length. Allow 2" of duct to overlap the exhaust pipe.
4. Secure the duct to the exhaust pipe with the other clamp.
Installation Instructions
EXCESSIVE
EXHAUST
8
DO
DON'T
PLACE
EXHAUST
CRUSH
EXHAUST
WALL