Appendix 1; Recording Aes Outputs 1-8 To Pro Tools ™ Hd At 192Khz; Digital Card Jumper Positions - Disabling Aes Outputs 5-8 - Focusrite ISA428 MkII Mode D'emploi

Appendix 1

Recording AES Outputs 1-8 to Pro Tools ™ HD at 192kHz
To record all eight channels digitally to Pro Tools™ HD at 192kHz, all eight AES channels need to be enabled on the ISA428 MkII
(jumper positions shown on Appendix 2) and 2 Digital cards must be fitted in the HD192 interface. A 25-pin to
two 25-pin cable must then be used, with the following pinout:
Pin No. ISA428 MkII
ADC Connector
1 AES 8+
2 GND
3 AES 7-
4 AES 6+
5 GND
6 AES 5-
7 AES 4+
8 GND
9 AES 3-
10 AES 2+
11 GND
12 AES 1-
13 NC
14 AES 8-
15 AES 7+
16 GND
17 AES 6-
18 AES 5+
19 GND
20 AES 4-
21 AES 3+
22 GND
23 AES 2-
24 AES 1+
25 GND
HD 192 Break HD 192 Break
Out Connector 1 Out Connector 2
NC NC
GND GND
NC NC
NC NC
GND GND
NC NC
AES 4+ AES 8+
GND GND
AES 3- AES 7-
AES 2+ AES 6+
GND GND
AES 1- AES 5-
NC NC
NC NC
NC NC
GND GND
NC NC
NC NC
GND GND
AES 4- AES 8-
AES 3+ AES 7+
GND GND
AES 2- AES 6-
AES 1+ AES 5+
GND GND
17