Gima Oxy-100 Instructions De Fonctionnement Et D'entretien page 26

ENGLISH
26
Figure 4-1 Default Screen
Description:
" ": Memory full icon; if the memory is full, the memory full icon " " appears
on the screen. No display of this icon means the current storing space is not
full. If the memory is full, the data storing will continue in such way the new
record will overwrite the oldest record, so that it's recommended to upload the
stored data into the computer in time.
Note: during the measurement, short time press recall/mute " " key to turn
off or resume the pulse beep sound.
4.3 Display Screen with PI Value
On the default display screen, press " / " Navigation key to shift screens
between default screen and display screen with PI value. The display screen
with PI value is shown below.