Accessories - SCHOTT KL 1500 HAL Mode D'emploi

KL 1500 HAL / KL 1500 H - Operating instructions
Lamp off, fan running, fault
status indication
"Overheating"
Lamp off, fan not running,
fault status indication "No
Fan"
Lamp off, fan running, fault
status indication "No Light
Guide"
6. Accessories for KL 1500 HAL
A wide range of accessories is available for your KL 1500 HAL. A separate brochure gives you
comprehensive information (turn to page 15 for the order address)
Only SCHOTT light guides and accessories guarantee perfect operation, safety and optimum light
yield.
6.1 Light guides
Self supporting and flexible light guides in various lengths and diameters are available, as well as
point and slit illuminators.
6.2 Halogen lamps
When ordering halogen lamps as spare parts (see point 6.4 of these instructions), you will receive
the lamp type that gives you the maximum light yield and best possible degree of illumination.
6.3 Filters
Optical filters can either be inserted into the filter slide (7) or placed in front of the light guide exit as
a screw in or push on filter in conjunction with an auxiliary focussing device (accessory).
Details of the auxiliary focussing device and the filter types available as standard can be found in
the accessories catalogue.
Electronics overheated
Fan defective, impeller jammed Have authorised customer
No recommended light guide in
the light guide socket
Light guide is not plugged in
until it stops
Provide for sufficient cooling,
verify correct lamp type, place
the instrument back into
operation after an extended
cooling period
service perform repairs
Plug recommended light guide
into the light guide socket, check
for proper seating
Plug in light guide into the light
guide socket until it stops
13/15