Copy A File Stored In The Programmer To An Epm - Lenze EEPM1RA Instructions De Mise En Service

4.8 Copy a file stored in the Programmer to an EPM
With this function it is possible to copy a parameter file saved in the EPM programmer to an EPM.
• Plug the EPM, to which you want to copy the parameter file, into the EPM PORT.
Press
1.
MENU
2.
ENTER
3.
ENTER
4.
5.
COPY
TO EPM
6.
ENTER
7.
MENU
The display shows...
FILE –> EPM
#DEFAULTS(400)>>
#DEFAULTS(400)>>
#ABC_ _ _ _ _(400)>>
TRANSFERRING 0%
DAT=400 EPM=312
CONFIRM= [ENTER]
TRANSFERRING 100%
#ABC_ _ _ _ _(400)>>
FILE –> EPM
ENGLISH
Operation
Explanation
Press the key until the menu appears in the display.
The stored name of a parameter file (e.g. DEFAULTS)
stored in the EPM programmer, is displayed.
The cursor is blinking in the display on the right.
Select the parameter file you want to copy (e.g.
ABC_ _ _ _ _).
The parameter file is copied or..
...if the parameter version of the file does not
correspond with the parameter version of the EPM
in the EPM PORT,...
...a security check takes place concerning the
existing data on the EPM:
Press the ENTER key to overwrite the existing data.
Press the MENU key, if you want to abort the
process.
The parameter file will be copied.
Returns to the main menu.
13