Controls And Features: Beverage Center; Temperature Control; Adjustable Shelves - GE Profile PWS06D Serie Manuel Du Propriétaire Et Instructions D'installation

Controls and Features - Beverage Center

Temperature Control

The operating temperature of the beverage center is
from 38°F (3°C) to 61°F (16°C).
This product is designed for storing and cooling
beverages and/or wines. It is not intended for storage
of perishable foods.
As with any refrigeration-type product, there is a slight
temperature variance at different locations within the
cabinet.
temperature will go below 55°F (13°C) or above 90°F
(32°C).
1. Locking/Unlocking Control Panel: To change
any settings, control panel needs to be unlocked. If
control panel is locked, display will flash Loc for 4
seconds when a key is pressed, and the key press
is ignored.
Press and hold Lock for 3 seconds to lock/unlock
control panel.
2. Interior Light: To switch the interior light on/off,
simply press Light. The display will flash ON or OFF
in this process.
When light setting is ON, interior light is always on.
When light setting is OFF, interior light turns on when
door is opened, and turns off when door is closed.
Door Alarm: If door is left open for more than 2
minutes, door alarm will sound until door is closed.
holding Light for 10 seconds.

Adjustable Shelves

The beverage center features removable and
adjustable shelves.
The top three shelves are adjustable. Shelves can be
placed on different height levels for versatile storage
configuration or storing larger items.
To remove a shelf, open the door completely to avoid
potential damage to the shelf. Lift slightly and pull the
shelf forward. The shelf may fit tightly in the track.
To replace a shelf, open the door completely to avoid
potential damage to the shelf. Slide the shelf into the
tracks along the sides of the cabinet until it stops.
6
6
Lock
Hold 3 Sec
4 1
5
Light Power
Hold 3 Sec
2 3
3. Power: Press and hold the Power key for 3 seconds
to power on or off the beverage center.
4. UP and DOWN to Change Temperature Setting:
temperature setting change mode. The display will
start to flash the current temperature setting.
or increase the desired temperature in increments of
one degree.
If no key is pressed in 3 seconds, the display will
stop flashing, and your change will be automatically
accepted.
When temperature setting is changed, allow 24
5. Sabbath Mode: Press and hold Lock and Light
simultaneously for 5 seconds to enter or exit
Sabbath mode.
6. Fahrenheit and Celsius:
switch between Fahrenheit and Celsius temperature
display.
SAb when in
Shelves can
be placed on
levels
49-1000514 Rev. 1