Design Guide; Cabinet Enclosure Dimensions; Dimensions And Clearances - GE Monogram ZIC30GNNII Instructions D'installation

Cabinet Enclosure Dimensions For Fully Integrated Instructions
25" min. depth
Design Tip: We recommend finishing the inside surface of the enclosure a min. of 4" from the front face.
Design Tip: If using 84" enclosure, consider adding a finished valence above the refrigerator case.
34 3/8"
Design Tip: It is possible to align your refrigerator drawer with adjacent cabinetry for a completely integrated
look.

Design Guide

30" Finished Width
Height options
80" or * 84"
34 3/8"
3
The cutout depth must be 25"for
flush installations.
• The front face of the refrigerator fits
flush with 25"depth adjacent
cabinets.
• The refrigerator can fit into a 79-1/2"
minimum,
84-1/2" maximum high enclosure.
Although the refrigerator itself can
only be raised to 80 3/8",
• The fresh food door panel can be
constructed to fill additional height;
see page 10.