GE Profile PWS06D Serie Manuel Du Propriétaire Et Instructions D'installation page 16

Troubleshooting tips ... Before you call for service
Problem
Moisture forms on outside
of appliance
Frost or moisture collects
inside
Interior light does not
operate
Hot air from bottom of
appliance
Appliance never shuts off
16
Possible Causes
Not unusual during periods of
high humidity.
Door left open.
Too frequent or too long door
openings.
In humid weather, air carries
moisture into appliance when
door is opened.
Temperature control set at
coldest setting.
Appliance is unplugged.
The circuit breaker is tripped /
the fuse is blown.
GFI outlet is tripped.
Normal air flow cooling
motor.
Too frequent or too long door
openings.
Extreme environment
temperatures
What To Do
evaporate in time.
Always make sure that the door is closed after opening.
Check to see if a bottle is holding door open.
Appliance will dissipate moisture in time. If bothersome,
wipe surface dry.
Appliance will dissipate moisture in time. If bothersome,
wipe surface dry.
See Temperature Control section.
Push the plug completely into the outlet.
Replace fuse or reset the breaker.
Reset outlet.GFI outlet is not recommended.
In the refrigeration process, it is normal for heat to be
expelled in the area under the appliance. Some floor
coverings are sensitive and will discolor at these safe
and normal temperatures.
This is normal. The appliance will cycle off after it
reaches desired temperature.
Normal operation in extreme temperatures.
49-1000514 Rev. 1