Environmental Protection - Ryobi ETMS1825 Manuel D'utilisation

GB
FR DE ES IT NL
REPAIRS
DANGER!
Repairs to electric tools must be carried out by
qualified electricians only!
a
Electric tools in need of repair can be sent to the service
center of your country. Refer to the space parts list for
the address.
Please attach a description of the fault to the electric tool.

ENVIRONMENTAL PROTECTION

The machine's packaging material is 100% recyclable.
Worn out power tools and accessories contain
considerable amounts of valuable raw and rubber
materials, which can be recycled.
TROUBLE SHOOTING
This section describes problems and malfunctions which
you should be able to resolve yourself. If the measures
described here do not solve your problem, please refer
to "Repairs".
DANGER!
Many accidents happen particularly in connection
with problems and malfunctions. Therefore
please note:
Always unplug before servicing.
Check that all safety devices are operational again
after each fault service.
Motor does not run
No power
Check cables, plug, outlet and mains fuse.
No crosscut function
Transport lock engaged
Unlock the transport lock.
Safety lock engaged
Actuate the safety lock.
Machine lacks power
The saw blade is blunt and worn (possibly has heat
marks from overheating).
The saw blade is not suitable for material you are cutting
(see chapter "Technical Specifications").
Saw blade warped:
Replace the saw blade (see chapter "Maintenance")
PT DK SE FI NO RU PL
English
Saw vibrates heavily
Saw blade warped
Saw blade incorrectly mounted
Saw squeals when starting
The drive belt is loose
Rotating table does not move at all or is hard to turn.
Saw dust has built up under the rotating table.
LABELING
12
CZ HU RO LV LT EE
Replace the saw blade (see chapter "Maintenance")
Remove the saw blade and then mount it again
correctly (see chapter "Maintenance").
Tighten the drive belt (see chapter "Maintenance –
Drive belt tensioning").
Remove the saw dust.
SYMBOL DESIGNATION
Please read the instructions
carefully before starting the
machine.
CE conformity
Safety Alert
V
Volts
Please recycle
Recycle raw materials instead of
disposing as waste. The machine,
accessories and packaging should
be sorted for environmentally-
friendly recycling.
Do not reach into the running saw
blade.
Wear safety goggles and hearing
protection,Wear dust mask.
HR SI SK GR TR