Optelec Traveller+ Mode D'emploi page 16

Optelec
6. Writing with the Traveller
See also page 6.
To use the Traveller
1. Tilt the screen all the way up until it blocks.
Put the device upright, as shown in the figure on
page 6.
2. Pull the blue revolving camera entirely and
carefully out until you hear and feel it clicks. The
external illumination LED's will automatically
switch on in this position.
The magnification size is fixed on 5 times in writing
position. Hold the Traveller
using it in the writing position to retain its stability.
English
Traveller
+
for writing:
+
with one hand while
+
User Manual
+
16