CEDARLANE Bellini Intelli: Maitre de la Cuisine Mode D'emploi page 9

Getting to Know the
Intelli Kitchen Master
Before using the Intelli Kitchen Master for the first
time, make sure that it has all the listed parts and
accessory.
1. Placing the bowl:
Ensure that blades inside the bowl are properly
locked into place with the lever at the base of
the bowl before placing bowl in the cavity of the
appliance.
Place the bowl into the cavity of the appliance
(can only be located one way with the base of
the handle lining up with the scallop( Semi circle
curve ) in the cavity.
Press bowl down firmly to ensure it is pushed all
the way down into the cavity.
Warning:
The lid cannot be engaged in locked position
if bowl sits up too high ( Where bowl is not firmly
pushed down all the way into the cavity of the
appliance ).
Bellini Intelli Kitchen Master
2. Placing the lid:
The lid is moulded with a locking tab and
actuator finger / locking lever at opposite ends .
Position the lid diagonally onto the bowl with
locking tab at 8 O'Clock and actuator finger /
locking lever at 2 O'Clock ( As shown in figure 5
& 6 below ).
Push down firmly and rotate clockwise to
engage both the locking tab underneath the lip
on the appliance and actuator finger in the slot
on the handle.
Figure 5
Figure 6
Warning :
The appliance is equipped with
a safety interlock mechanism linking lid via
actuator arm in the handle to engage micro
switch in the appliance.
The appliance will not operate unless the lid is
fitted.
Only when both bowl and lid are correctly fitted
will the symbol " " as shown on the LC display
disappear.
The Intelli Kitchen Master bowl has a maximum
capacity of 2litres indicated by level marks of
0.5litres both on the inside as well as on the
outside.
Caution:
Never exceed the maximum level of
the bowl.
9
Clip