Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NOTE: For an added safety measure the
pulse function is only available in the
OFF mode.
Temperature
Intelli Kitchen Master has a temperature range
from 37°C minimum to a maximum of 100°C and
Steam setting (ST) that can be programmed
with the temperature control TEMP. The
temperature is increased or selected by turning
this control in a clockwise direction and reduced
in the anticlockwise direction. The selected
temperature will appear on the screen and a
beep will indicate that the Intelli Kitchen Master
has reached the selected temperature.
This innovative Intelli Kitchen Master comes with
the heating film technology which is situated in
the base of the bowl and allows the machine
to quickly reach the desired temperature. The
temperature interval is of 10°C and begins from
37°C: 37, 50, 60, 70 until it reaches a maximum of
100°C and Steam setting (ST)
Alternate between °F &°C
To alternate unit of measure from Celsius to
Fahrenheit on the display screen, ensure that the
appliance is in Stand-By mode.
Press ON/OFF button and hold for approximately
3 seconds, then unit of measure will switch
from Celsius to Fahrenheit or visa versa from
Fahrenheit to Celsius.
Note :
•Factory default Temperature unit of
measure is Celsius .
•The last used temperature unit of
measure will be locked in when next
using the appliance.
Tabled below are the equivalent Temperature
Settings for both Celsius and Fahrenheit:
°C
37
50
60
°F
100
120
140
Bellini Intelli Kitchen Master
70
80
90
100
160
175
195
212
Note: When preparing ingredients at
a temperature higher than 60°C, it is
strongly recommended not to use the
pulse and higher speeds of (5-10) and
caution must be taken when touching
the bowl and Measuring cup. The
Steam setting is shown on the screen
as per the following example.
Speed Dial
Soft start function (above 60°C )
If the Pulse button is pressed or the high speed
level actuated while the temperature in the bowl
is 60 °C or above , the electronic system
prevents the food from escaping by delaying the
speed increase. This soft start only works if the
food has been heated up or cooked in the bowl.
If using the machine to process food that has
not been heated or cooked in the appliance
(e.g. preparing a gravy from hot meat juices)
you should only increase the speed slowly and
gradually.
Intelli Kitchen Master comes with 10 speeds
for chopping, mixing, blending, kneading and
grating that are controlled by the Speed dial.
Speed for Creamy Mixtures
As certain recipes require a smooth or slow
speed, such as cream, soups, whipped creams
etc. Intelli Kitchen Master comes with an
accessory, the Mixing Tool, specially designed for
these types of dishes.
This accessory is placed on top of the blades
inside the bowl and mixes at speeds 1 -3.
Note: Do not surpass speed 3 when
the Mixing tool is in place.
7
Publicité
Table des Matières
