Lcd Screen - CEDARLANE Bellini Intelli: Maitre de la Cuisine Mode D'emploi

LCD Screen

When Intelli Kitchen Master is connected to the
power supply, the LCD screen lights up and
shows all the control symbols of the Intelli Kitchen
Master. (See Figure 1)
Figure 1
Time
The selected time appears in the upper part
of the screen with the symbol of the clock and
the work time. Here the time is shown in minutes
and seconds and can be programmed up to a
maximum of 90 minutes. (See Figure 2)
Figure 2
Speed
The selected speed is shown on the screen by
the Speed symbol and ranges from 1 to 10.
(See Figure 3)
Figure 3
Speed for Creamy Mixtures
The symbol for creamy mixtures appears on the
screen when the speeds 1, 2 and 3 are selected.
The use of the Mixing Tool accessory for creamy
mixtures is optional and may vary according to
the type of recipe.
Note: The Pulse symbol does not
appear on the screen when this
function is being used.
Bellini Intelli Kitchen Master
Temperature
The temperature selected is shown on the screen
by the TEMP symbol (See Figure 4) with a range
from 37° C to 100° C. This temperature is the
exact temperature inside the bowl and can be
changed without having to stop the machine.
Figure 4
Steam Function:
setting ST is only for steam function.
Screen Messages
Bowl lid is open
Bowl lid not correctly positioned and /or
bowl not pushed down far enough into
the cavity of the appliance.
The Intelli Kitchen Master is fitted
with a microswitch in the base of the
appliance.
Correct positioning of the bowl onto the
appliance and the lid onto the bowl will
allow the actuator arm in the handle to
push down and shift the actuator button
at the base of the handle outwards to
engage the microswitch to operate the
appliance.
Programmed temperature reached
This symbol flashes on the screen for
a few seconds to indicate that Intelli
Kitchen Master has reached the
selected temperature. Also, a beep
can be heard when the temperature is
reached.
8