Property Damage - CEDARLANE Bellini Intelli: Maitre de la Cuisine Mode D'emploi

•
Allow hot ingredients to cool before
transferring them directly.
•
Wash and dry the blades thoroughly never
leaving them to soak.
•
If the appliance blade speed shows signs of
slowing under load at the selected speed or
stalling , please progressively increase speed
to the nearest speed setting where the
blades will move freely.
Note: Speeds 1, 2 and 3 are for
cooking (with heat) and mixing at the
same time. For additional safety the
Intelli Kitchen Master will not work if the
speed for mixing and cooking is higher
than 3.
The cooking function will only work
when the speed level for mixing of 1, 2
or 3 is programmed in addition to the
temperature and time.
•
For preparing dishes at high speeds, turn the
Measuring cup to lock position to avoid spills.
•
Special caution has to be taken when
removing the chopping blade as they are
very sharp.
•
Never place your hands in the bowl when
the machine is turned on and in functioning
mode.
Note: When using the appliance in
conjunction with heating function
please be aware that recipes containing
ingredients with high sugar or dairy
contents may leave a thin film of
caramelised deposit (Brown staining)
on the bottom of the bowl during the
cooking process " This can easily be
removed after the use of the appliance
by adding equal amounts (approx .
300ml) of white vinegar & water, heating
bowl and allowing it to steam for a few
minutes, turn the appliance Off and
allow mixture to sit overnight, dispose of
mixture in the morning and immediately
rub with a fine scouring pad and rinse
bowl afterwards.
When crushing ice cubes or grinding
hard food, select the Pulse button in
short bursts until the desired result is
achieved.
Bellini Intelli Kitchen Master
Danger of scalding by splashing hot
food
Never use the Pulse button or high speed or
abruptly increase the speed above speed 3
when processing hot food .
Danger of injury by escaping food
Turn the Measuring cup to lock position while
operating at higher (6 –10) speed levels or
pressing Pulse button to chop or to purée
cold food to avoid the measuring cup or food
splashed out.

Property damage

Place your appliance on a clean, solid, even
and non-heatable surface so that it cannot slip.
Keep the appliance in a sufficient distance from
the edge of this surface to prevent it from falling
down. When preparing dough or chopping food,
an imbalance can develop in the mixing bowl
which, under certain circumstances, may cause
the whole appliance to move. Do not, therefore,
leave the appliance unattended while it is
operating as it might fall from the work surface.
When Kneading dough, Never use a low speed
of 1-4 at the beginning, always mix the dough
at higher speeds for a few seconds, then set the
speed back to 2-3 for 3-4 minutes. Never use
the Mixing tool when Kneading dough. if the
blades become jammed or the unit begins to
seriously vibrate , turn it off immediately to avoid
damaging the appliance.
Pulse and High Speeds (7-10) are only designed
for short time operation, never use this function
for more than 30 seconds at one time.
Leaking of food
Ensure sealing ring of the blade is fitted to the
blade bearing. If there is no sealing ring the
food to be mixed or cooked may leak out and
damage the appliance.
13
Sealing Ring