LG GSX960NEAZ Manuel Du Propriétaire page 16

3
After adjusting the difference in the height of
the appliance door, fasten the keeper nut by
rotating it clockwise.
To tighten the nut
If it is impossible to adjust the height of the
appliance door through the above method, level
the door according to the following guide.
[Method2]
1
When the appliance door is removed, loosen
the screw at the bottom of the lower hinge.
2
Insert the appropriate number of ring sheets
between the lower hinge and the lower
bracket. (Total number of ring sheets: 4)
Lower Lower
hinge bracket
Ring sheet
16
3
Resecure the bracket screw after fitting
the ring sheets before refitting the door.
When the door is refitted, steps 1,2 and 3 of
adjusting the height of the door can then be
repeated.
CAUTION
• When tilting the appliance backward to loosen
the screw at the bottom of the appliance, two
or more people should hold the handles at the
bottom and rear top side of the appliance.
EN