Anwenderinformation; User Information - Hewi 802 Serie Notice De Montage Et Mode D'emploi

Masquer les pouces Voir aussi pour 802 Serie:
Table des Matières

Publicité

Anwenderinformation | User information | Information pour les utilisateurs | Gebruikers-
informatie | Informazioni per l'utente | Información para el usario | Informacje uzytkownika
Brugeroplysninger | Brukerinformasjon | Användarinformation
Zweckbestimmung
HEWI Kippspiegel bieten mit der Kippfunktion die
Möglichkeit, durch einen individuell anpassbaren
Winkel sowohl von stehenden als auch von
sitzenden Personen genutzt zu werden.
Die Lichtquelle des Spiegels ist nicht als Raumbe-
leuchtung geeignet, sondern nur als Zusatzbeleuch-
tung vorgesehen.
Haftungsausschluss
Die Firma HEWI übernimmt keine Haftung für
Personen- oder Sachschäden, die durch unsachge-
mäße Montage, Anwendung oder Reinigung,
insbesondere unter Missachtung der in dieser
Anleitung aufgeführten Warn- und Sicherheitshinwei-
se entstehen oder entstanden sind.
Sicherheitshinweise
Montage nur von autorisierten Elektrofachleuten
unter Beachtung der geltenden Vorschriften, v. a.
auch der Vorschrift VDE 0100, Teil 701 bzw. der
jeweiligen nationalen Vorschriften.
Bei Nichtbeachtung erlischt unsere
Garantie- und Haftungsverpflichtung.
Nach der Montage ist die Anleitung dem Anwender
zur Verfügung zu stellen.
Ÿ Montage- und Gebrauchsanleitung beachten.
Ÿ Bei Fragen, Problemen, Unklarheiten oder auftre-
tenden Schäden: HEWI-Support kontaktieren.
Ÿ Sicherstellen, dass Produkt ausschließlich durch
qualifiziertes Fachpersonal montiert, gewartet und
repariert wird.
Ÿ Bei Annahme Produkt auf Schäden prüfen.
Mängel sofort melden.
Das Produkt ist trocken und druckfrei zu lagern.
Ÿ Produkt ausschließlich montieren/verwenden:
Ÿ gemäß Zweckbestimmung
Ÿ im Originalzustand ohne Modifikationen
Ÿ in einwandfreiem Zustand
Ÿ Ausschließlich HEWI-Ersatzteile verwenden.
Ÿ Ausschließlich HEWI-Befestigungsmaterial
verwenden.
Ÿ Ausschließlich in geschlossenen Räumen verwenden.
4 | HEWI
Intended purpose
The tilt function of the HEWI tilted mirrors allows the
mirror to be set at an adjustable angle so it can be
used by persons standing or
The light source of the mirror is not suitable as room
lighting, but only as additional lighting.
Exclusion of liability
HEWI accepts no liability whatsoever for damage to
persons or property that occurs or has occurred as
a result of improper mounting or maintenance,
particularly if the safety instructions and other points
to note listed are not or have not been observed in
full. HEWI accepts no liability whatsoever for
damage occurring from incorrect cleaning.
Safety instructions
Mounting only by authorised qualified electricians
and in compliance with the applicable regulations,
especially regulation VDE 0100, Part 701 or the
respective national regulations.
Failure to comply voids warranty and liability
obligation.
Following installation, the instructions must be made
available to the user.
Ÿ Follow with the installation instructions and
instructions for use.
Ÿ In case of questions, problems, uncertainties or
if damage occurs, contact the HEWI support
service.
Ÿ Ensure that the product is installed, maintained
and repaired by qualified, skilled personnel only.
Ÿ Check the product for damage on acceptance.
Report defects immediately.
Ÿ Install/use the product only:
Ÿ in accordance with its intended purpose
Ÿ in its original condition without modifcations
Ÿ in perfect condition
Ÿ Use original spare parts only.
Ÿ Use only HEWI fixing materials.
Ÿ Only use in closed rooms.
sitting.

Publicité

Table des Matières
loading

Table des Matières