Installation Of Anti-Splash Cover; Guidelines On How To Use The Device - Bartscher FTG91MA1 Manuel D'installation, D'utilisation Et D'entretien

OFF
A) Turn the gas control knob right to switch the
gas burner off (position 1).
CHROME PLATED GRIDDLE

The device with the chrome plated
griddle should be heated up for ca. 30 minutes
in the temperature of 200 °C.
5.3.

Installation of anti-splash cover

During the installation of anti-splash cover follow
the instructions below:
1. Put the back part on the heating plate (A).
2. Catch on both side parts (B) and position
them.
5.4.

Guidelines on how to use the device

Longer interval in the use of the device
If the device is not used for prolonged time,
please follow these instructions:
1. Close the gas supply by closing the gas valve.
2. Thoroughly clean the appliance and adjacent
surfaces.
3. Apply the vaseline oil on the stainless steel
surfaces.
4. Perform all maintenance works.
Guidelines on regular use of the device
To guarantee the proper operation of the device,
follow these instructions:
 Use only equipment recommended by the
manufacturer;
 Verify whether the bottom of the oven was
inserted properly.
B) Turn the gas control knob right to extinguish
the ignition flame (position 0).
A
Do not use the device for deep
frying in oil or fat directly on the
griddle plate.

Do not grill deep-frozen products on
the plate: this may damage the plate.

Do not scrub the griddle plate in order
to remove food residues, in particular special
care should be taken when cleaning the
chrome plated griddle.
Regularly instruct the specialist personnel to
perform the following maintenance works:
 Installation
control;
 Thermocouples functionality control;
 Control of operation of the extractor and
possible cleaning;
 Control of safety thermostats.
7
ENGLISH
B
pressure and tightness
GB