Sony MEX-R1 Mode D'emploi page 38

The following items can be set (follow the page
reference for details):
" " indicates the default settings.
z
SET (Setup)
CLOCK-ADJ (Clock Adjust) (page 8)
CT (Clock Time)
To set "ON" or "OFF" (
BEEP
To set "ON" ( ) or "OFF."
z
RM (Rotary Commander)
To change the operative direction of the rotary
commander controls.
– "NORM" ( ): to use the rotary commander in
z
the factory-set position.
– "REV": when you mount the rotary
commander on the right side of the steering
column.
AUX-A*
1 (AUX Audio)
To turn the AUX source display "ON" (
"OFF" (page 41).
WL*
1 * 2 (Wireless)
– "CH1" ( ), "CH2," "CH3," "CH4": to avoid
z
interference with the wireless transmission.
– "OFF": to turn off the wireless transmission.
DSPL (Display)
CLOCK (Clock Information)
To display the clock and the display items at the
same time.
– "ON": to display at the same time.
– "OFF" ( ): to not display at the same time.
z
DIM (Dimmer)
To change the brightness of the display.
– "AT" ( ): to dim the display automatically
z
when you turn the lights on.*
– "ON": to dim the display.
– "OFF": to deactivate the dimmer.
CONTRAST
To adjust the contrast of the main unit display.
The contrast level is adjustable in 7 steps.
M.DSPL*
4 (Motion Display)
To select the Motion Display mode.
– "SA" ( ): to show moving patterns and
z
spectrum analyzer.
– "ON": to show moving patterns.
– "OFF": to deactivate the Motion Display.
DEMO* 1 (Demonstration)
To set "ON" ( ) or "OFF" (page 8).
z
A.SCRL (Auto Scroll)
To scroll long displayed items automatically
when the disc/album/track is changed.
– "ON": to scroll.
– "OFF" ( ): to not scroll.
z
38
) (page 34, 36).
z
) or
z
3
P/M (Play Mode)
LOCAL (Local seek mode)
– "ON": to only tune into stations with stronger
signals.
– "OFF" ( ): to tune normal reception.
z
MONO (Monaural mode)
To improve poor FM reception, select monaural
reception mode.
– "ON": to hear stereo broadcasts in monaural.
– "OFF" ( ): to hear stereo broadcast in stereo.
z
REG*
5
To set "ON" ( ) or "OFF" (page 35).
z
SND (Sound)
EQ7 TUNE (page 37)
HPF (High Pass Filter)
To select the front/rear speaker cut-off
frequency: "OFF" ( ), "78HZ" or "125HZ."
z
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency:
"OFF" ( ), "125HZ" or "78HZ."
z
LOUD (Loudness)
To enhance bass and treble at lower volume.
– "ON": to reinforce bass and treble.
– "OFF" ( ): to not reinforce bass and treble.
z
DVD LVL*
6 (DVD level) (page 23)
To set the audio output level according to the
recorded DVD audio format.
AUX LVL*
7 (Auxiliary level)
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources.
EDIT
NAMEEDIT (page 39)
NAME DEL (page 40)
BTM (page 33)
*1 When the unit is turned off.
*2 MEX-R5 only.
*3 When the illumination control lead is connected.
*4 When the unit is turned on.
*5 When FM is received.
*6 When a disc is played back.
*7 When auxiliary equipment is connected and
played.