Radio; Storing Automatically; Btm; Storing Manually - Sony MEX-R1 Mode D'emploi

Radio

Caution
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
OFF
MODE
SRC
SRC MODE
TOP MENU
SOUND
ENTER
SETUP
LIST
SYSTEM LI ST
SYSTEM
MENU
MENU
PICTURE
Z × Z
EQ
AUDIO SUBTITLE
1 2
Number
buttons
4 5
7 8
CLEAR
0

Storing automatically

— BTM

1
Press (SRC) (SOURCE) repeatedly
until "TUNER" appears.
To change the band, press (MODE)
repeatedly. You can select from FM1, FM2,
FM3, MW or LW.
2
Press (SYSTEM MENU), then press M/m
repeatedly until "BTM" appears.
3
Press (ENTER).
The unit stores stations in order of frequency
on the number buttons ((1) to (6)).
A beep sounds when a setting is stored.
ATT DVD
./>
+
MENU
M/m
ENTER
–
DSO EQ7
ANGLE
AF
3
TA
+
6
9 VOL
PTY
–
DSPL

Storing manually

While receiving the station that you
want to store, press and hold a
number button ((1) to (6)) until
"MEM" appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previous stored station will be replaced.
Tip
When a RDS station is stored, the AF/TA setting is
also stored (page 35).

Receiving the stored stations

Select the band, then press a number
button ((1) to (6)) or M/m.

Tuning automatically

Select the band, then press ./>
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If you know the frequency of the station you want to
listen to, press and hold ./> to locate the
approximate frequency, then press ./>
repeatedly to fine adjust to the desired frequency
(manual tuning).
With the main unit
To search for the station, press (SEEK) +/–.
Receiving a station through a
list

— list-up

You can list up the frequency.
1
Select the band, then press (LIST).
The frequency appears.
2
Press M/m repeatedly until the desired
station appears.
3
Press (ENTER) to receive the station. 33