Siemens SIMATIC NET Manuel page 178

4. Technical data
Interfaces
Connection from F/O to OSM line
Connection for voltage supply and
indicator contact
Voltage supply
(redundant inputs decoupled)
Power consumption at DC 24 V
Current consumption (at nominal voltage)
Overload current protection at input
V.24 Interface
Network size parameter
F/O line length between
two OSMs or between OSM/ORM
Optical power
Laser protection
Transmitter power min. (62,5/125 µm F/O)
Input power min.
(62,5/125 µm F/O)
Permissible environmental conditions
ORM operating temperature
Storage/transport temperature
Relative humidity in operation
Constructional assembly
Dimensions (B x H x T) in inches
Mass in pound
Assembly
Protection class
Radio interference level
Interference immunity
Scope of delivery
SIMATIC NET Industrial Ethernet™ ORM incl.
Terminal block for power supply
Description and operating instructions
4 rubber feet
1 pair mounting brackets
Order number
SIMATIC NET Industrial Ethernet™ ORM
Accessories
SIMATIC NET Industrial Ethernet™ OSM
SIMATIC NET FIBER OPTIC F/O
"Industrial Twisted Pair Networks" manual
Ethernet manual
Notes on CE identification
The link modules for Industrial
Ethernet™ comply with the regula-
tions of the following European
directive:
89/336/EEC
Council Directive on the harmoni-
sation of the legal regulations of
member states on electromagnetic
compatibility (amended by Direc-
tives 91/263/EEC, 92/31/EEC and
93/68/EEC).
4
2 x 2 BFOC sockets (100 Mbit/s; 100BaseFX)
1 x 5-pin terminal block pluggable
2 x DC 24 V (DC 18 up to 32 V)
safety extra-low voltage (SELV)
29 W
1,2 A max.
non-changeable thermal fuse
RJ11 socket
0-9843 ft (62,5/125 mm fiber optic with ≤ 2,6 dB/km at 1300 nm; ≥ 500 MHz*km)
0-9843 ft (50/125 mm fiber optic with ≤ 1,6 dB/km at 1300 nm; ≥ 500 MHz*km)
Class 1 conform to EN 60825
-20 dBm
-31 dBm
0 ºC up to + 40 ºC
- 40 ºC up to + 80 ºC
< 90% (non condensing)
17 x 1.7 x 11
7.7
rack mounted in 19" rack or table mounted
IP 30
EN 55022 Class B
EN 50082-2
6GK1105-1AA00
6GK1105-0AA00
see catalogue IK10
6GK1970-1BA00-0AA0
HIR:943 320-001
Area used Requirements for
emitted interference
Residential EN 50081-1: 1992
Industrial EN 50081-2: 1995
The EU declaration of conformity is kept
available for the responsible authorities in
accordance with the above-mentioned EU
directives at:
Siemens Aktiengesellschaft
Bereich Automatisierungs- und
Antriebstechnik
Industrielle Kommunikation (A&D PT2)
Postfach 4848
D-90327 Nürnberg
interference immunity
EN 50082-1: 1997
EN 50082-2: 1995
The product can be used in the residential
sphere (residential sphere, business and
trade sphere and small companies) and in
the industrial sphere.
The precondition for compliance with EMC
limit values is strict adherence to the con-
struction guidelines specified in this
description and operating instructions and
in the "Industrial Twisted Pair Networks"
manual!