Side Discharge Attachment; Adjusting The Handle Bar - IKRA BRM 1446 SN TL Manuel D'utilisation

2.3 Side discharge attachment

Use the side discharge attachment when using the prod-
uct for side discharging.
1. Open the side deflector guard, hold it in position and
align the hooks on the attachment with the rods to
hang it onto (Fig. 8 & Fig. 9).
8
Fig.
Fig. 9
2. Lift the side deflector guard and pull the attachment
off the rods to remove it.

2.4 Adjusting the handle bar

1. Loosen quick-release clamp.
2. Raise or lower the handle bar according to your
needs (Fig. 10, 11 & 12).
3. Ensure the quick-release clamps are tightened
enough.
GB | Operating Instruction
(BRM 1448 SSM TL)
(BRM 1448 SSMTL)
10
Fig. 10 (lowest position)
Fig. 11 (middle position)
Fig. 12 (most upper position)