Mulching Insert; Side Ejector With Locking Lever - IKRA IBRM 2351 TL Manuel D'utilisation

Mulching insert

The mulching insert prevents grass from being collected
by blocking the collection chute. This allows the grass
clippings to be deposited back on the lawn during cutting.
18
1. Open the rear deflector guard, hold it in position and
insert the mulching insert into the rear discharge
chute (Fig. 18). Ensure the lower side of the handle
snaps in place.
19
2. Press the lower side of the handle to release and re-
move the mulching insert (Fig. 19).
3. When removing the mulching insert, you should drag
it to the left side and remove it from the mower deck.
GB | Operating Instructions

Side ejector with locking lever

Use the side discharge attachment when using the prod-
uct for side discharging.
20
Locking lever
1. Before you use the side ejector, press the end of the
21
2. Open the side deflector guard, hold it in position and
22
10
locking lever down to unlock the side ejector cover
(see fig. 20 and 21).
1
align the hooks on the attachment with the rods to
hang it onto (Fig. 22 & Fig. 23).
2