Changing The Presetting Of The Power-On Volume (On Vol); Restoring The Volume At Switch-On (Last Vol) - Blaupunkt St. Louis MP56 Notice D'emploi Et De Montage

➔
Press the softkey
"BEEP").
The "BEEP" menu item is fl ash-
ing. The presetting for the sig-
nal tone is shown on the main
line A .
➔
Adjust the desired volume us-
ing the volume control
the rocker switch
ments 0 to 6).
You hear a signal tone at the se-
lected volume.
➔
If you do not want to hear any
signal tones, set the volume to
zero.
"BEEP OFF" appears on the main
A
line .
Changing the presetting of the
power-on volume ( ON VOL)
You can confi gure the device so
that the playback after switch-on
always starts with the volume set
here. For this purpose, the "ON
VOL" menu item must be high-
lighted.
➔
Press the softkey
"ON VOL").
The presetting for the pow-
er-on volume is shown on the
A
main line .
➔
Adjust the desired volume us-
ing the volume control
the rocker switch
ments 1 to 50).
Changing basic settings in the settings menu
9
(next to
5
or
3
(incre-
<
(next to
5
or
3
(incre-
The "ON VOL" menu item is
highlighted.
Restoring the volume at switch-
on ( LAST VOL)
You can confi gure the device so
that the playback after switch-on
always starts with the previous-
ly selected volume. For this pur-
pose, the "LAST VOL" menu item
must be highlighted.
➔
Press the softkey
"LAST VOL").
The main line
"LAST VOL ACTIVE". The "LAST
VOL" menu item is highlighted.
;
(next to
A
briefl y displays
51